Promethium – Properties – Price – Applications – Production

About Promethium

Promethium is one of only two such elements that are followed in the periodic table by elements with stable forms. All of its isotopes are radioactive. In nuclear reactors, promethium equilibrium exists in power operation. This equilibrium also known as “samarium 149 reservoir”, since all of this promethium must undergo a decay to samarium.

Summary

Element	Promethium
Atomic number	61
Element category	Rare Earth Metal
Phase at STP	Synthetic
Density	7.264 g/cm3
Ultimate Tensile Strength	160 MPa
Yield Strength	70 MPa
Young’s Modulus of Elasticity	46 GPa (est.)
Mohs Scale	N/A
Brinell Hardness	N/A
Vickers Hardness	N/A
Melting Point	1042 °C
Boiling Point	3000 °C
Thermal Conductivity	15 W/mK
Thermal Expansion Coefficient	9 µm/mK
Specific Heat	0.18 J/g K
Heat of Fusion	kJ/mol
Heat of Vaporization	— kJ/mol
Electrical resistivity [nanoOhm meter]	750
Magnetic Susceptibility	N/A

Production and Price of Promethium

Raw materials prices change daily. They are primarily driven by supply, demand and energy prices. In 2019, prices of pure Promethium were at around N/A $/kg.

Promethium can be produced by irradiating neodymium and praseodymium with neutrons, deuterons and alpha particles. It can also be prepared by ion exchange of nuclear reactor fuel processing wastes.

Source: www.luciteria.com

Mechanical Properties of Promethium

Strength of Promethium

In mechanics of materials, the strength of a material is its ability to withstand an applied load without failure or plastic deformation. Strength of materials basically considers the relationship between the external loads applied to a material and the resulting deformation or change in material dimensions. In designing structures and machines, it is important to consider these factors, in order that the material selected will have adequate strength to resist applied loads or forces and retain its original shape. Strength of a material is its ability to withstand this applied load without failure or plastic deformation.

For tensile stress, the capacity of a material or structure to withstand loads tending to elongate is known as ultimate tensile strength (UTS). Yield strength or yield stress is the material property defined as the stress at which a material begins to deform plastically whereas yield point is the point where nonlinear (elastic + plastic) deformation begins.

See also: Strength of Materials

Ultimate Tensile Strength of Promethium

Ultimate tensile strength of Promethium is 160 MPa.

Yield Strength of Promethium

Yield strength of Promethium is 70 MPa.

Modulus of Elasticity of Promethium

The Young’s modulus of elasticity of Promethium is 70 MPa.

Hardness of Promethium

In materials science, hardness is the ability to withstand surface indentation (localized plastic deformation) and scratching. Brinell hardness test is one of indentation hardness tests, that has been developed for hardness testing. In Brinell tests, a hard, spherical indenter is forced under a specific load into the surface of the metal to be tested.

Brinell hardness of Promethium is approximately N/A.

The Vickers hardness test method was developed by Robert L. Smith and George E. Sandland at Vickers Ltd as an alternative to the Brinell method to measure the hardness of materials. The Vickers hardness test method can be also used as a microhardness test method, which is mostly used for small parts, thin sections, or case depth work.

Vickers hardness of Promethium is approximately N/A.

Scratch hardness is the measure of how resistant a sample is to permanent plastic deformation due to friction from a sharp object. The most common scale for this qualitative test is Mohs scale, which is used in mineralogy. The Mohs scale of mineral hardness is based on the ability of one natural sample of mineral to scratch another mineral visibly.

Promethium is has a hardness of approximately N/A.

See also: Hardness of Materials

Promethium – Crystal Structure

A possible crystal structure of Promethium is double hexagonal close-packed structure.

In metals, and in many other solids, the atoms are arranged in regular arrays called crystals. A crystal lattice is a repeating pattern of mathematical points that extends throughout space. The forces of chemical bonding causes this repetition. It is this repeated pattern which control properties like strength, ductility, density, conductivity (property of conducting or transmitting heat, electricity, etc.), and shape. There are 14 general types of such patterns known as Bravais lattices.

See also: Crystal Structure of Materials

Crystal Structure of Promethium

Thermal Properties of Promethium

Promethium – Melting Point and Boiling Point

Melting point of Promethium is 1042°C.

Boiling point of Promethium is 3000°C.

Note that, these points are associated with the standard atmospheric pressure.

Promethium – Thermal Conductivity

Thermal conductivity of Promethium is 15 W/(m·K).

The heat transfer characteristics of a solid material are measured by a property called the thermal conductivity, k (or λ), measured in W/m.K. It is a measure of a substance’s ability to transfer heat through a material by conduction. Note that Fourier’s law applies for all matter, regardless of its state (solid, liquid, or gas), therefore, it is also defined for liquids and gases.

Coefficient of Thermal Expansion of Promethium

Linear thermal expansion coefficient of Promethium is 9 µm/(m·K)

Thermal expansion is generally the tendency of matter to change its dimensions in response to a change in temperature. It is usually expressed as a fractional change in length or volume per unit temperature change.

Promethium – Specific Heat, Latent Heat of Fusion, Latent Heat of Vaporization

Specific heat of Promethium is 0.18 J/g K.

Heat capacity is an extensive property of matter, meaning it is proportional to the size of the system. Heat capacity C has the unit of energy per degree or energy per kelvin. When expressing the same phenomenon as an intensive property, the heat capacity is divided by the amount of substance, mass, or volume, thus the quantity is independent of the size or extent of the sample.

Latent Heat of Fusion of Promethium is kJ/mol.

Latent Heat of Vaporization of Promethium is — kJ/mol.

Latent heat is the amount of heat added to or removed from a substance to produce a change in phase. This energy breaks down the intermolecular attractive forces, and also must provide the energy necessary to expand the gas (the pΔV work). When latent heat is added, no temperature change occurs. The enthalpy of vaporization is a function of the pressure at which that transformation takes place.

Promethium – Electrical Resistivity – Magnetic Susceptibility

Electrical property refers to the response of a material to an applied electric field. One of the principal characteristics of materials is their ability (or lack of ability) to conduct electrical current. Indeed, materials are classified by this property, that is, they are divided into conductors, semiconductors, and nonconductors.

See also: Electrical Properties

Magnetic property refers to the response of a material to an applied magnetic field. The macroscopic magnetic properties of a material are a consequence of interactions between an external magnetic field and the magnetic dipole moments of the constituent atoms. Different materials react to the application of magnetic field differently.

See also: Magnetic Properties

Electrical Resistivity of Promethium

Electrical resistivity of Promethium is 750 nΩ⋅m.

Electrical conductivity and its converse, electrical resistivity, is a fundamental property of a material that quantifies how Promethium conducts the flow of electric current. Electrical conductivity or specific conductance is the reciprocal of electrical resistivity.

Magnetic Susceptibility of Promethium

Magnetic susceptibility of Promethium is N/A.

In electromagnetism, magnetic susceptibility is the measure of the magnetization of a substance. Magnetic susceptibility is a dimensionless proportionality factor that indicates the degree of magnetization of Promethium in response to an applied magnetic field.